MITECH PDC – CLEANING AGENT
MITECH PDC preparation is used to remove the remains of paints and acrylic, silicone, silicate plasters/renders from the surface of ceramic, clinker tiles, plastics, zinc-plated and coated steel sheet as well as glass and paint coated wood. Application and substrate temperature +5°C do +25°C Consumption depends on the level of soiling Packaging atomiser 750 ml
MITECH GLOMIX – ALGAE AND FUNGI REMOVER
MITECH GLOMIX is intended for removing microbiological contamination from the surfaces of external walls. It features a broad activity spectrum against algae, fungi and lichens found on structures. It cleans stone, brickwork, cement plaster/render, cement-lime, acrylic, silicone and mineral plasters/renders. Application and substrate temperature +5°C to +25°C Working time after min. 12 h Consumption 0.1-0.15…
MITECH SPW KLEJ – BONDING ACCELERATION AGENT FOR ADHESIVE MORTARS
MITECH SPW KLEJ agent is a ready-to-use bonding accelerator for adhesive mortars. Recommended for use while installing thermal insulation systems at lower temperatures ranging from +5°C to 0°C and at an elevated air humidity of around 80%. Following 8 hours the temperature can drop down to -5°C. The agent accelerates the bonding of adhesive mortars…
MITECH SPW – PLASTER AND PAINT BONDING ACCELERATING AGENT
MITECH SPW agent is a ready-to-use bonding and drying accelerator for acrylic, silicone, silicate, siloxane and silicone-silicate plasters and dispersion paints. It is especially recommended for use during façade installation work at low temperatures ranging from +1 to +10°C and at an elevated air humidity up to around 80%. The agent accelerates the evaporation of…
MITECH PME – FAÇADE CLEANING FLUID
MITECH PME cleaning fluid is intended for removing soling from thin-layer renders used in external thermal insulation composite systems (ETICS). Removes dust, fatty stains, soot and other organic soiling. It is used for routine cleaning of thermal insulation systems and substrates prior to renovation work. The fluid can be applied on any building substrates i.e.:…
MITECH KAMIEŃ – IMPREGNATOR FOR STONE
MITECH KAMIEŃ is intended for waterproofing natural stone, granite, marble, gres tiles, clinker tiles and brickwork. The agent gives the surface processed hydrophobic properties providing it with the “pearling effect”, at the same time improving its gloss and emphasising the surface colour. The agent protects the surface against destructive weather factors. Once dried, the impregnator…
MITECH BRUK – COBBLE IMPREGNATOR
MITECH BRUK is used to waterproof paving stones. Creates a strong hydrophobic coat, protects paving stones against humidity by reducing its absorbability, soiling and increasing its frost-resistance. In addition, it creates an oil-resistant coating. It can be applied on concrete, granite, basalt paving stones and concrete garden architecture items. Application and substrate temperature +5°C to…
MITECH BETON – CONCRETE IMPREGNATOR
MITECH BETON impregnator is intended for concrete waterproofing. The agent protects against the destructive impact of dampness and creates a hydrophobic coating. Thanks to substrate deep penetration it extends the life of protected surfaces. Application and substrate temperature +5°C to +25°C Single layer drying time 2 h Consumption 0,1-0,2 l/m² Packaging 5 l
MITECH MOZAIKA – IMPREGNATOR FOR MOSAIC PLASTERS
MITECH MOZAIKA is intended for waterproofing mosaic plasters. The impregnator protects against the destructive impact of dampness It is especially recommended for waterproofing mosaic renders in places exposed to temporary dampness. In addition, the preparation can be used to protect external sandstone, marble, terrazzo claddings, brickwork and concrete walls. application and substrate temperature +5°C to…
MITECH DECORATIVE TEMPLATES
Self-adhesive templates intended for making stone, brickwork, split stone imitations in the zone of building plinth, recommended while applying MITECH ARTDECOR or MITECH DEKOMASA decorative plasters. The decoration made by using the templates imitates granite, sandstone or clinker. Template Template sample Template size [mm] Surface area [m²] BRICKWORK 103,5 x 88,0 0,91 NATURAL STONE 103,5…