Specialized additives and mortars

MITECH 3514 clear anti-graffiti coating

Microwaxes-based agent for protecting against graffiti. Intended for use on the majority of surfaces both smooth and porous e.g.: thin-layer, mineral, acrylic, silicone, cement-lime renders, surfaces coated with façade paints. It is recommended for thin-layer renders because of the low temperature of pressurised water (60°C) needed to remove graffiti from its surface. 5-year operation (life)…

MITECH 3502 clear anti-graffiti coating

Microwaxes-based agent for protecting against graffiti. Intended for use on the majority of surfaces both smooth and porous e.g.: thin-layer, mineral, acrylic, silicone, cement-lime renders, surfaces coated with façade paints. It protects against graffiti made with spray paints, water-resistant markers and ink as well as air pollution, acid rains and humidity for at least 7…

MITECH 3721 permanent anti-graffiti coating

Permanent, one-component, clear silane and siloxane-based agent, for surface protecting absorptive mineral substrates, e.g. concrete, sandstone, limestone, AmerBlok, brickwork, thin-layer plasters, mosaics against graffiti and posters, It protects façades against graffiti, posters, other soiling and dampness for 20 years, allowing users to remove graffiti an unlimited number of times and cleaning the surface with no…

MITECH 3720 prime coat prior to applying an anti-graffiti coating

Agent for priming mineral substrates, used prior to applying permanent MITECH 3721 coating. Intended for the majority of materials: e.g.: concrete, sandstone, limestone, AmerBlok, brickwork, renders: thin-layer, cement-lime, mosaics , etc. Effectively removes graffiti and reduces the excessive penetration of the said coatings into the substrate, which minimises discolouration changes, façade darkening (wet surface effect),…

MITECH RGS white renovation plaster finish mortar

MITECH GR plaster finish mortar is intended for thin-layer finishing of vapour-permeable plasters. e.g. an aerated plaster from a system used to dry walls after a flood, traditional plasters and Mitech RZT renovation plasters/renders. The renovation plaster finish is a dry mix of cement, silica and lime aggregates, modified synthetic resins and aerating additives. After…

MITECH RTW multi-purpose renovation render

Multi-purpose MITECH RTW renovation render is a one-component, ready-to-use, grey-coloured cement mortar, based on special sulphate-resistant binders with pozzolanic effect, selected aggregates, synthetic resins and special additives. After adding and mixing with water, it is especially convenient to use, because the single product can be used to apply the following renovation render layers: anti-saline barrier,…

MITECH RZT renovation render mortar with WTA certification

MITECH RZT renovation render is a factory prepared, dry mix of special pozzolana cements and selected aggregates, resistant to sulphates. It contains aerating, hydrophobising and adhesion-boosting admixtures. It is ready-to-use after mixing with water. After adding and mixing with water a grey coloured render mortar is obtained, featuring perfect plasticity, easy to apply on vertical…

MITECH ROT renovation rendering mortar

MITECH ROT renovation rendering mortar is a mix of Portland cement, quartz aggregates and admixtures. It is intended for rendering (floating coat) under Mitech RZT and RZT-WTA renovation renders and other cement and cement-lime renders. When using under Mitech RZT-WTA renovation render the rendering mortar should be reinforced with Mitech EZP adhesion boosting emulsion. In…

MITECH RZT renovation render mortar

MITECH RZT renovation render mortar is a dry mix of special cements and selected aggregates, containing aerating and hydrophobic properties and adhesion boosting admixtures. It is ready-to-use after mixing with water and proper aeration. After adding and mixing with water a grey coloured render mortar is obtained, featuring perfect plasticity, easy to apply on vertical…

MITECH RSC renovation putty

MITECH RSC putty is intended for applying plaster/render finish on the surface of Mitech RZT renovation plasters/renders, when drying overground and underground bulkheads (walls, foundation walls, ceilings, pillars etc.) with dampness and saline spots. The mortar can be also applied on regular cement-based, cement-lime based or lime plasters/renders. It is especially recommended for use on…
Back to top