MITECH RSC putty is intended for applying plaster/render finish on the surface of Mitech RZT renovation plasters/renders, when drying overground and underground bulkheads (walls, foundation walls, ceilings, pillars etc.) with dampness and saline spots. The mortar can be also applied on regular cement-based, cement-lime based or lime plasters/renders. It is especially recommended for use on historical buildings. The renovation putty should not be used on gypsum substrates and on renders and masonry covered with paintwork or synthetic coats. It should be applied in layers about 2 mm thick, up to a maximum total thickness of not more than 5 mm. The putty is a powder mix of cement, silica and lime aggregates, modified synthetic resins and aerating additives. After mixing with water it is easy and comfortable to apply. It features a perfect adhesion to substrates allowing to freely apply it in any direction (downwards too). The product features hydrophobic properties, porosity and diffusability compatible with renovation and drying plasters/renders. The mortar is available in grey or white colour. It can be used both indoors and outdoors.
||+5°C to +25°C
|| 120 minutes
|Consumption when applying 1 mm thick layer
||25 kg bags